Rot13 oder Rotx
-
- Beiträge: 12
- Registriert: 30.09.2017 11:14:26
Rot13 oder Rotx
Hallo, hat jemand von euch eine Idee, wie sich die Funktion Rot13 oder Rot_beliebig in Planmaker umsetzen lässt. Natürlich nicht zur Verschlüsselung, nur zum Unkenntlichmachen für den ersten Blick...
Re: Rot13 oder Rotx
Dazu braucht es eine benutzerdefinierte Funktion und also eine Programmierung. Sie könnten sich mit BasicMaker ein Script schreiben, das eine Zelle ausliest, Rot-13 macht und das Ergebnis zurückschreibt.
Re: Rot13 oder Rotx
Dazu wäre es hilfreich, wenn BM64 endlich (wieder) laufen würde, die aktuelle Nightly tut es immer noch nicht. Gibt es eine vage ETA?
Mit freundlichem Gruß
Karl
SM 2018 rev. 982/0109/64, klassisches Menu @ W8.1/64 /Deutsch/Deutsch // emC 7
SM 2024NX Nightly, klassisches Menu
16GB Ram; Core i5-3450 mit integriertem Intel HDGraphics 4000, Treiber 10.18.10.4276; Samsung SSD 840pro
2560x1440 Monitor 100% Darstellungsgröße /// LaserJet 1200 per USB via Fritzbox 6591.
Empfehlung für supereinfache Bildschirmvideos: https://www.screentogif.com/
Karl
SM 2018 rev. 982/0109/64, klassisches Menu @ W8.1/64 /Deutsch/Deutsch // emC 7
SM 2024NX Nightly, klassisches Menu
16GB Ram; Core i5-3450 mit integriertem Intel HDGraphics 4000, Treiber 10.18.10.4276; Samsung SSD 840pro
2560x1440 Monitor 100% Darstellungsgröße /// LaserJet 1200 per USB via Fritzbox 6591.
Empfehlung für supereinfache Bildschirmvideos: https://www.screentogif.com/
Re: Rot13 oder Rotx
Von welchem Problem sprechen Sie?
Martin Kotulla
SoftMaker Software GmbH
SoftMaker Software GmbH
Re: Rot13 oder Rotx
Das Typumwandlungsproblem. BM 64 öffnen, etwa "Kalender.bas" öffnen, F9 und:
"C:\Users\K\Documents\SoftMaker\Beispiele\Kalender.bas : Error in line: 72 - Type mismatch"
Zeile 72 ist: GetYear.Year = year(now())
Mit freundlichem Gruß
Karl
SM 2018 rev. 982/0109/64, klassisches Menu @ W8.1/64 /Deutsch/Deutsch // emC 7
SM 2024NX Nightly, klassisches Menu
16GB Ram; Core i5-3450 mit integriertem Intel HDGraphics 4000, Treiber 10.18.10.4276; Samsung SSD 840pro
2560x1440 Monitor 100% Darstellungsgröße /// LaserJet 1200 per USB via Fritzbox 6591.
Empfehlung für supereinfache Bildschirmvideos: https://www.screentogif.com/
Karl
SM 2018 rev. 982/0109/64, klassisches Menu @ W8.1/64 /Deutsch/Deutsch // emC 7
SM 2024NX Nightly, klassisches Menu
16GB Ram; Core i5-3450 mit integriertem Intel HDGraphics 4000, Treiber 10.18.10.4276; Samsung SSD 840pro
2560x1440 Monitor 100% Darstellungsgröße /// LaserJet 1200 per USB via Fritzbox 6591.
Empfehlung für supereinfache Bildschirmvideos: https://www.screentogif.com/
Re: Rot13 oder Rotx
Ah, diese Sache. Ich habe noch einmal bei den Entwicklern nachgebohrt.
Martin Kotulla
SoftMaker Software GmbH
SoftMaker Software GmbH
-
- Beiträge: 12
- Registriert: 30.09.2017 11:14:26
Re: Rot13 oder Rotx
Gut, mit BasicMaker, passt.